Added on October 1, 2023
Suitable for soil and lawn, in the position where the column belongs to dig 20cm * 20 * 30cm small pit will be buried in the vertical part of the column into the middle to adjust the horizontal height of the fence, pouring section of good cement can be.
Factory direct quality assurance
Thickened high-quality galvanized steel pipe material, surface electrostatic spraying is not easy to rust not easy to lose color.
Pre-embedded installation (soil ground) column lengthening:
1, the railing connector set on the beam, after confirming the railing and column drop, the connector screw hole position with drilled screws, measure the exact position, you can assemble the connector all the way up to the column, assembly, pay attention to the number of corner columns needed.2, determine the position of the column installation, generally from the corner to install the first column, the specific operation is as follows: find out the corner of the intersection of the line, with the Intersection for the center of the column, digging 300 * 300 * 500mm or so of the pit. 3, will be equipped with a good connector column into the dug pit, in turn, the railing will be inserted into the connectors
4, with wire on both sides of the column were pulled, the bottom of the balustrade with a brick pad flat, pay attention to each column should be fixed with wire.
5、After adjusting the level and vertical of the railing, start pouring the concrete work, add the right amount of concrete into each pit to leave 100mm back to the soil position is suitable for the future growth of plants.6、Calibrate the level and vertical of the guardrail again, compact the layer of back to the soil, complete the installation work.7、Wipe the installed guardrail clean, end the installation.
We show the product picture are taken in kind, may be due to the display configuration of the different will have a slight color difference!
Building materials products will have slight scratches and abrasions, mind please do not buy!